12
Status Screens
System lamp faults and service indicators are covered on this page.
Alerts
A Service or Alarm indicator may be illuminated on the Home screen. Should this occur, the
following steps should be taken to address the alert:
1. Observe the alert type on the control panel
2. Ensure all system alerts have been properly
addressed
3. Select HOME button to return to main screen
4. Press START CYCLE to resume normal system
operation
Service Indicators
The “Service” alert will illuminate every 8 run hours as a “clean lamps” notification or when
lamps need replacement. The User Setting screen will differentiate need to perform:
1. Lamp Cleaning
a.
Press “Service” button on home screen
b. Lamp Clean indicators will be illuminated in
Yellow
c. Wipe lamps with isopropyl alcohol and
clean cloth
d.
Press “Factory Settings” on bottom right
of screen
e. Enter Passcode (1470) and press Enter
f. Press
“Reset Service Light” button to
clear alert
