Eneo DLR-1004/500V, Руководство по эксплуатации, Страница: 40 / 64

User’s Manual
32
NOTE: For the Record action, the camera you select should be set to the Event or Time
& Event recording mode in the Record Schedule setup screen.
Highlight the box under the Notify heading and press the button. You can toggle the entire list
On and Off by highlighting
Notification
and pressing the button. You can toggle the individual
items On and Off by highlighting that item and pressing the button. Highlight OK and press
the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification
setup screen and the DVR should be registered in the RAS (Remote Administration System).
Video Loss
Highlight Video Loss in the Event menu and press the button. The Video Loss setup screen
appears.
Highlight the Actions tab, and the Video Loss Actions setup screen appears.
NOTE: For the Record action, the camera you select should be set to the Event or Time
& Event recording mode in the Record Schedule setup screen.
Figure 36 ─ Video Loss Settings setup screen.
Highlighting the box under the Video Loss
Interval heading allows you to set the duration
of a signal loss before the DVR will report a
Video Loss. The DVR will not consider any
signal loss from a camera to be a Video Loss
if the detected signal loss is shorter than the
interval set on this screen.
Figure 37 ─ Video Loss Actions setup screen.
The DVR can be set to react to video loss
differently for each camera. Each camera can
be associated with another camera and/or notify
a number of different devices.
Highlight the box under the Record heading
and press the button. A list of cameras
appears. You can associate as many cameras
with that camera as you wish. If the DVR
detects video loss on the selected camera, it
starts recording video from all the associated
cameras.