Eneo DLR-1004/500V, Руководство по эксплуатации, Страница: 25 / 64

4-Channel Digital Video Recorder
17
NOTE: The network configuration you set should be tested by selecting Test , otherwise
the Next button will cannot be selected, and you cannot move to the next step.
y
Use DSL/PPPoE Setup: Selecting the box allows you to set up the DSL network. Entering
the ID and password for DSL connection is required.
NOTE: When error message “No Device supporting uPnP” displays, check the NAT device
supports the UPnP Port Forwarding function and the function is set to enabled.
DVRNS Setup
y
Enable NAT:
Select the box when using the
NAT (Network Address Translation) device.
y
DVR Name: Enter the DVR name to be
registered on the DVRNS server.
y
Check: Select the box to check whether or
not the name you entered can be used.
NOTE: The DVR name you entered should
be checked by selecting
Check , otherwise
the DVRNS changes will not be saved.
NOTE: When entering no name or a name already registered on the DVRNS server, an error
message displays.
Select the Finish button to finish the Setup
Wizard.
Shutdown
Highlight Shutdown in the System menu and press the button. The Shutdown screen displays
asking you to confirm whether or not you want to shut the system down.
Figure 16 ─ Shutdown screen.
After selecting Shutdown and pressing the button, a screen
will appear telling you when it is safe to disconnect power.