Eneo DLR-1004/500V, Руководство по эксплуатации, Страница: 32 / 64

User’s Manual
24
Highlight Use and press the button to toggle between On and Off. Highlight the box
beside
User
/
Password
and press the button. A virtual keyboard appears allowing
you to enter the user ID and password.
NOTE: This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
Highlight the box beside S ender and enter the sender’s e-mail address. Use the virtual keyboard
to enter the e-mail address.
NOTE: The e-mail address must include the “@” character to be a valid address.
Highlight the box beside
Recipient
and enter the recipient’s e-mail address. Use the virtual
keyboard to enter the e-mail address.
Highlight the Test box and press the button to test emailing with the current settings you made.
Highlight the Callback tab, and the Callback setup screen displays.
Highlight the box beside Authentication and press the button. An
Authentication screen appears.
Figure 24 ─ Notification Callback setup screen.
Highlight LAN and press the button to toggle
between On and Off. When LAN is turned On
you can change the IP addresses.
Highlight the
IP Address
box that you want to
change and press the button. Use the arrow
buttons to enter the IP address of the computer
you want contacted during an event. You can
enter up to five IP addresses.
Highlight the box beside Retry and enter the
number of times you would like the DVR to try
contacting the computer. You can select from
1 to 10 retries.