Eneo DLR-1004/500V, Руководство по эксплуатации, Страница: 27 / 64

4-Channel Digital Video Recorder
19
NOTE: This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
Highlight the LAN tab, and the LAN setup screen displays.
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from
your network administrator.
Highlight the box beside
DNS Server
. Press the
Up
and
Down
arrow buttons to set the IP address
of the DNS server.
Highlight Use UPnP and press the button to toggle between On and Off. When it is On, port
forwarding from the NAT (Network Address Translation) device to the DVR will be enabled
automatically via UPnP (Universal Plug and Play) service. This function will be especially useful
when accessing a port on a private IP address.
NOTE: For the UPnP service to work, the NAT device should support the UPnP Port
Forwarding function and the function should be set to enabled.
NOTE: You cannot change the port settings when Use UPnP is On.
Highlight the Status box and press the button to display the port numbers forwarded from the
NAT device via UPnP service.
Highlight the Port Number Setup… box and press the button. The Port Number Setup
screen appears.
NOTE: You will need to get the appropriate Port Numbers for each RAS and WebGuard
related program (Admin, Callback, Watch and Search) from your network administrator.
Figure 19 ─ LAN (Manual) setup screen.
Highlight the box beside Type and press the
button. You can select the type of network
configuration from:
Manual , DHCP and ADSL
(with PPPoE) . Select the desired type and
press the button.
Selecting
Manual
from the Type allows you to
set up LAN parameters manually.
Change the numbers by highlighting them and
using the
Up and Down arrow buttons to
increase or decrease the number. The factory
default LAN settings are:
IP Address: 192.168.1.129
Gateway: 192.168.1.254
Subnet
Mask: 255.255.255.0
Change the numbers by highlighting them and using the Up and
Down arrow buttons to increase or decrease the number. The
factory default Port settings are:
Remote Admin: 8200
Remote Callback: 8201
Remote Watch: 8016
Remote Search: 10019