Eneo DLR-1004/500V, Руководство по эксплуатации, Страница: 38 / 64

User’s Manual
30
Event Setup
Figure 33 ─ Event menu.
Motion Detection
Highlight Motion Detection in the Event menu and press the button. The Motion Detection
setup screen appears.
Figure 34 ─ Motion Detection Settings setup screen.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight
the box under the
Zone heading, and press the button. The Motion Detection Zone screen
displays.
Press the button to display the menu screen. The menu on the setup screen has the following
functions:
Your DVR has built-in video motion detection.
Video motion detection can be turned On or Off
for each camera.
Highlighting the box under the
Sensitivity
heading and pressing the
button allows you to adjust the DVR’s sensitivity to motion for
Daytime and Nighttime independently. There are five settings with
1 being the least sensitive and 5 being the most sensitive.
The Motion Detection Zone screen is laid over the video for
the selected camera. You can set up motion detection zones
by selecting or clearing blocks.
NOTE: You can set up motion zones one block at a time
in groups of 3 individual block groups. A block group is
positioned within the image area using the Up and Down
arrow buttons, and individual blocks within the block
groups are selected or cleared using the camera buttons.