42
Collegamenti
Collegamento a RJ-45
Collegare un cavo RJ-45 standard alla porta di rete della telecamera di rete. Generalmente
si utilizza un cavo incrociato per il collegamento diretto al PC, mentre si usa un cavo di-
retto per il collegamento a un hub. È anche possibile utilizzare un router con PoE (Power
over Ethernet) per fornire alimentazione alla telecamera.
Collegamento dell'audio
Collegare l'altoparlante alla linea di uscita audio e il microfono esterno alla linea di ingres-
so audio.
Collegamento degli allarmi
AI (ingresso allarme)
Si possono utilizzare dispositivi esterni per segnalare alla telecamera dome di reagire agli
eventi. È possibile collegare interruttori meccanici o elettrici ai connettori AI (ingresso
allarme) e G (terra).
G (terra)
Collegare il lato di terra dell'ingresso allarme e/o dell'uscita allarme al connettore G (terra).
AO (uscita allarme)
La telecamera di rete può attivare dispositivi esterni come segnalatori acustici o luci.
Collegare il dispositivo ai connettori AO (uscita allarme) e G (terra).
Collegamento di Test Monitor Out (CVBS)
Collegare il cavo video di prova a 3 pin (opzionale) per verificare il video di prova.
Collegamento dell'alimentazione
Collegare l'alimentazione di 12VCC della telecamera di rete. Collegare il polo positivo (+)
alla posizione "+" e il polo negativo (-) alla posizione "-" per l'alimentazione CC.
ATTENZIONE:
Prestare attenzione a non invertire la polarità durante il collegamento
del cavo di alimentazione. È anche possibile utilizzare un router con PoE (Power over
Ethernet) per fornire alimentazione alla telecamera. Per le specifiche sull'alimentazione
vedere l'Appendice, Specifiche del prodotto. Se PoE e 12 VCC sono entrambi applicati, la
telecamera riceve l'alimentazione da PoE.
Содержание 227007
Страница 46: ...46...
Страница 47: ...47 IT...