17
DE
Installation
Installation
Zum Betrieb der Netzwerkkamera müssen ein Netzwerkkabel zur Datenübertragung und
die Stromversorgung durch ein Netzteil angeschlossen werden. Je nach Betriebsmethode
kann ein zusätzliches Alarmkabel angeschlossen werden. Zur Befestigung an verschiede-
nen Standorten wenden Sie sich bitte an einen Installateur.
Die Dome-Kamera sollte an einem Bauelement wie etwa Hartholz, einem Wandständer
oder Deckenbalken befestigt werden, welches das Gewicht der Kamera trägt. Zur Befesti-
gung an verschiedenen Standorten wenden Sie sich bitte an einen Installateur.
Installation und Einstellung der Kamera
1. Lösen Sie die vier Torxschrauben auf der Vorderseite des Gehäuses und belassen
Sie dabei die Schrauben in ihrer jeweiligen Öffnung im Gehäuse.
2. Bohren Sie mit der mitgelieferten Bohrschablone Montagelöcher und Kabellöcher
an der Stelle (Wand oder Decke), an der die Kamera angebracht werden soll.
[UNTERPUTZMONTAGE] (227008 – ISD-52F0023WFA)
Decke / Wand
Unterseite des Gehäuses / Kamera
Kunststoffdübel (x4)
Oberseite des Gehäuses
Torx-Schraube (x4)
Spezialsc O-Ring (x4)
Содержание 227007
Страница 46: ...46...
Страница 47: ...47 IT...