Endress ESE 604 DHG DIN, Перевод оригинальной инструкции по эксплуатации

Страница: 74 / 92

Service the power generator ESE 604 (ES) DHG DIN
74
ESE 604 DHG (ES) DIN Status: October 2018
6.2.2
Replacing the starter battery
1. Unscrew the battery holder
(Fig. 6-3-(1))
.
2. Remove the battery
(Fig. 6-3-(2))
from the battery compart-
ment.
3. Unscrew the battery cable. Push the protective terminal
caps back for this purpose and loosen the screws. Always
disconnect the cable from the NEGATIVE terminal first
and then disconnect the cable from the POSITIVE termi-
nal.

Battery is disconnected.
Fig. 6-3: Replacing the battery
4. Prepare a new battery.
5. The battery cables must first be screwed onto the
POSITIVE terminal, then onto the NEGATIVE-terminal
and then put on the terminal caps.
6. Put the battery back into the battery compartment.
7. Put the battery holder
(Fig. 6-3-(1))
back on.

The battery has been replaced.
WARNING!
A highly explosive electrolytic gas mixture develops
from gassing when charging batteries.

Flames, sparks, an open light and smoking are prohib-
ited.

Avoid sparks when handling cables and electrical de-
vices, as well as electrostatic discharge.

Avoid short-circuits.