Endress ESE 604 DHG DIN, Перевод оригинальной инструкции по эксплуатации

Страница: 62 / 92

Using special fittings / accessories
62
ESE 604 DHG (ES) DIN Status: October 2018
4. Unfasten the plug on the external charging device (e.g.
battery charging device) by turning anti-clockwise
5. Remove plug.
6. Screw on protective cap
(Fig. 5-7-(2))
of the 12V
connection socket by turning clockwise.

The battery charge maintenance unit is disconnected.
BEOS charge current socket
Fig. 5-8: BEOS charge current socket
1. Unscrew protective cap
(Fig. 5-8-(2))
of the socket
(Fig. 5-8-
(1))
anti-clockwise.
2. Connect the plug on the external charging device (e.g.
battery charging device) with the socket
3. Tighten the screw connection on the external charge plug
clockwise in order to lock the connection.

The battery charge maintenance unit is ready for use.
4. Unfasten the plug on the external charging device (e.g.
battery charging device) by turning anti-clockwise
5. Remove plug.
6. Screw on protective cap
(Fig. 5-8-(2))
of the connection
socket by turning clockwise.

The battery charge maintenance unit is disconnected.
Disconnect the battery
charge maintenance unit
Connect the battery
charge maintenance unit
Disconnect the battery
charge maintenance unit