Endress ESE 604 DHG DIN, Перевод оригинальной инструкции по эксплуатации

Страница: 63 / 92

Using special fittings / accessories
Status at: October 2018 ESE 604 DHG (ES) DIN
63
MagCode charge current socket
Fig. 5-9: MagCode charge current socket
1. Align the MagCode plug of the external charging device
(e.g. battery charging device) using the locking device
(Fig. 5-9-(2))
.
2. Place the plug on the MagCode socket
(Fig. 5-9-(1))
.

The plug is held on the MagCode socket by magnetic
force.

The battery charge maintenance unit is ready for use.
3. Detach the MagCode plug of the external charging de-
vice (e.g. battery charging device).

The battery charge maintenance unit is disconnected.
5.7
12V connection for supplying accessories with power
Apart from charge maintenance, the 12V connection socket
according to DIN 14690
(see Fig. 5-7)
also offers the option to
supply suitable accessories with a 12V DC voltage.
Proceed as follows to supply an external 12V accessory with
power at the 12V connection socket:
The following requirements must be met:

generator is ready for operation

a suitable external accessory, ready for operation

fully charged starter battery
Connect the battery
charge maintenance unit
Disconnect the battery
charge maintenance unit
Requirements
(2)