Endress+Hauser WirelessHART Fieldgate SWG70, Руководство по эксплуатации

Страница: 81 / 138

WirelessHART Fieldgate SWG70 Engineering
E Hauser 81
2. In the left pane, click on the Fieldgate.
3. Enter a name for the Fieldgate in the field "OPC Name". The name is added to the device
tree in the left pane. The OPC client identifies the Fieldgate through its OPC name.
4. Enter the "Long Tag Name" of the Fieldgate in the field "Device Name". The "Device
Name" must be identical to the "Long Tag Name", since the designation of the Fieldgate
is identified through it.
5. Enter the appropriate data in the fields "IP Address", "Port" and "HART Bus Address".
6. Click on the button "Communication Test", in order to check whether the Fieldgate can
be found.
NOTICE!
• If the test is unsuccessful, check your entries in the fields "Device Name", "IP Address" as well
as the Ethernet configuration. If necessary, consult your IT department.
7. Click on the icon "Learn" in the top left of the menu tray.
All objects that are connected to the Fieldgate are imported into the device tree. These
may be:
– Adapters: adapters such as a WirelessHART Adapter SWA70 or a field device with
antenna. You can add several field devices below an adapter.
– Subdevices: field devices without an antenna. You cannot add other objects below a
field device (subdevice).
8. In the left pane, click on Fieldgate SWG70.
9. Configure the remaining parameters. See Chapter 10.4.3 "Description of the
WirelessHART Fieldgate OPC Configurator" on page 83.
10. Configure all the adapters and field devices (subdevices) as described in Chapter 10.4.3.
In order to enable parameterization, select the adapter or field device concerned in the
left pane. The device tree can be structured using the object "Folder".
11. Use the File menu to store the configuration file.
– File > Save Active : the configuration file is stored under the name
GatewayConfiguration.xml in the folder that is accessed by the WirelessHART OPC
server.
– File > Save As : You can select your own file name and storage location for the
configuration file.