Endress+Hauser WirelessHART Fieldgate SWG70, Руководство по эксплуатации

Страница: 76 / 138

Engineering WirelessHART Fieldgate SWG70
76 E Hauser
Input Register parameters
Parameter Meaning Example Default
Table
Registers Defines the start register for the HART device value
– For Input Register the first value is normally 1
– The initial value can be overwritten only after a device has
been selected in the Long Tag drop-down menu
– Subsequent start registers are automatically generated
13 1
End Register End register for Digital I/O device values (generated
automatically) 14 65536
Long Tag Click to open a drop-down list of connected network devices – –
IO-Card Identifier of fieldgate card used by the device – –
Channel Identifier of card channel used by the device – –
Value Click to open a drop-down list of values for the selected device – –
Delete button Enter an appropriate value into the field
– which opens when a value is selected
Generate
Start Register Defines the start register for the HART device value
– For Input Registers this is normally 1, depending on the
Modbus system in use
13 1
Generation Order Order in which the devices are mapped to the Modbus
registers.
• Index: According to the index number, see Instrument List,
for example. See Chapter 10.1 "Instrument List" on page 64.
• Alphabetical: In alphabetical order according to the Long
Tag
• Alphabetical (sub-device): In alphabetical order according to
the Long Tag of the sub-device.
• IO card & channel: According to the IO card & channel
number of the wireless device.
• IO card & channel (sub-device): According to the IO card &
channel number of the sub-device.
– –
Value Click to open a drop-down list of values for the selected device – –
Value field Enter an appropriate value into the field
– which opens when a value is selected 0 0
Delete button Depending upon position, deletes the table or the table line – –
Default Settings Adds all HART Command 3 values to the value list, see See
Chapter 16 "Modbus Interface" on page 114. – –
Generate Writes mapping table to table in Table tab – –
Delete all mappings • Checked: Overwrites any table already in Table tab
• Unchecked: Adds any new devices found to existing table. – –
Operating elements
Import Imports a mapping table in CSV format – –
Export Exports the current mapping table in CSV format – –
Refresh Loads the mapping table currently stored in Fieldgate SWG70 – –
Apply Stores the current mapping table to Fieldgate SWG70 – –