Endress+Hauser Waterpilot FMX167, Руководство по эксплуатации

Страница: 7 / 24

Waterpilot FMX167 Incoming acceptance and product identification
Hauser 7
A0018803
1 Serial number
2 Nominal measuring range
3 CE mark or approval symbol
4 Identification number of the notified body for ATEX (optional)
5 Text for approval (optional)
3.2.2 Identifying the measuring device via the order code
Specific device features make up the order code. You can assign these features in the
"Ordering information" section of Technical Information TI00351P/00/EN.
3.3 Transport and storage
3.3.1 Transport
NOTICE
Devices or cable may be damaged
‣
Comply with the safety instructions, transport conditions for devices over 18kg (39.6lbs)
(DIN EN 61010-1).
‣
Transport the measuring device to the measuring point in its original packaging.
3.3.2 Storage
The device must be stored in a dry, clean area and protected against damage from impact
(EN 837-2).
Storage temperature range:
• FMX167: –40 to +80 °C (–40 to +176 °F)
• TMT181: –40 to +100 °C (–40 to +212 °F)
• Terminal box: –40 to +80 °C (–40 to +176 °F)
3.4 Scope of delivery
The scope of delivery comprises:
• Waterpilot FMX167, optionally with integrated Pt100 resistance thermometer
• Optional accessories (

ä 19)
Documentation supplied:
• Operating Instructions BA00231P (this document)
• Calibration report/Final inspection report
• SD00126P drinking water approval (optional)
• Devices suitable for use in hazardous areas: Additional documentation such as Safety
Instructions (XA)
3.5 CE mark, Declaration of Conformity
The devices are designed to meet state-of-the-art safety requirements, have been tested and
left the factory in a condition in which they are safe to operate. The devices comply with the
applicable standards and regulations as listed in the EC Declaration of Conformity and thus
comply with the legal requirements of the EC Directives. Hauser confirms the
conformity of the device by affixing to it the CE mark.
Wa t erpilo t FMX167
Serial-No.:
Messbereich/range:
1 2 3 4 5