Endress+Hauser Waterpilot FMX167, Руководство по эксплуатации

Страница: 19 / 24

Waterpilot FMX167 Accessories
Hauser 19
10 Accessories
Various accessories, which can be ordered separately from Hauser, are available for
the Waterpilot

see also Technical Information TI00351P/00/EN, "Ordering information"
section.
10.1 Mounting clamp
• Hauser offers a mounting clamp for easy Waterpilot mounting (

ä 9).
• Material: 316L (1.4404 ) and fiberglass reinforced PA (polyamide)
• Order number: 52006151
10.2 Terminal box
• Terminal box IP66/IP67 with GORE-TEX
®
-filter incl. 3 installed terminals.
The terminal box is also suitable for installing a temperature head transmitter (order
number: 52008794) or for four additional terminals (order number: 52008938)
(

ä 11).
• Order number: 52006152
The terminal box is not intended for the FMX167 with Ex nA explosion protection in
the hazardous area. When using the terminal box in hazardous areas, installation must
comply with the corresponding national standards and regulations and the Safety
Instructions or Installation or Control Drawings.
10.3 Additional weight for FMX167 with an outer diameter
of 22 mm (0.87 in) and 29 mm (1.14 in)
Hauser offers additional weights to prevent sideways movement that results in
measuring errors, or to make it easier to lower the device in a guide tube.
You can screw several weights together. The weights are then attached directly to the
Waterpilot. For the Waterpilot with an outer diameter of 29 mm (1.14 in), version with a
plastic insulation, a maximum of 5 weights may be attached.
A0018748
• Material: 316L (1.4435)
• Weight: 300 g (10.581 oz)
• Order number: 52006153
ø22 (0.87)
M14x1
105.8 (4.16)
110.6 (4.35)
mm (in)