Endress+Hauser StamoLys CA 71 MN, Руководство по эксплуатации

Страница: 26 / 56

Operation StamoLys CA 71 MN
26 Hauser
5.3.8 DATA STORAGE-Measured values
!
Note!
Two menus, "DATA MEMORY 1" and "DATA MEMORY 2", are only
for the two-channel
version. In the one-channel version there is only one menu "DATA MEMORY".
5.3.9 DATA STORAGE-Calibration data
!
Note!
To enter this menu select the CONFIGURATION menu, browse to the "Calibration factor"
option and press the
J
key.
5.4 Calibration
5.4.1 Standard calibration data
The signal strength is processed device-internally as a frequency.
The following table provides an overview of the standard calibration data
(frequency-offset = 0).
!
Note!
Compare these values to your own data.
After changes in the CONFIGURATION menu and in case of software updates, you can
check and, if necessary, change the calibration data in the sub-menu.
Selection Display Info
Measured values
The data memory contains the last 1024
concentration measured values with date and
time. If there are no values available, "Empty set"
appears.
Browse through the data sets by pressing the
V
and
W
keys.
Serial output
You can output all data sets (in ASCII-format) via
the serial interface. For this, the receiving end (PC)
must be configured like this: 9600, N, 8, 1.
To send data, the receiving end (PC) must send
the ASCII character 81 ("Shift", "D").
Clear data This deletes all data sets.
53. 1 ppb
02.02.99 22:47
Serial output
yes: K no: E
Clear data
y: n: E
+
Selection Display Info
Calibration factor
This data memory contains the last 100 calibration
factors with date and time. If there are no values
available, "Empty set" appears.
Browse through the data sets by pressing the
V
and
W
keys.
Serial output
only available via PC!
no display
You can output all data sets (in ASCII-format) via
the serial interface. For this, the receiving end (PC)
must be configured like this: 9600, N, 8, 1.
To send data, the receiving end (PC) must send
the ASCII character 81 ("Shift", "C").
Clear data This deletes all data sets.
Calibr. factor
1.00
Clear data
y: n: E
+