background image

Overfill Prevention System SOP300

Electrical connection

Hauser

19

Is the device adequately protected from precipitation and direct sunlight?

Are the securing screws tightened securely?

6  

Electrical connection

6.1  

Connection conditions

L

DANGER

Electrical voltage!

Severe or life-threatening injuries!

Electrical work may only be performed by electrical technicians.

The electrical connection must be performed when the device is de-energized. Make sure

the device is de-energized.

Connect the protective ground.

L

DANGER

Risk of electric shock from faulty cables and components!

Faulty cables and components can cause an electric shock and life-threatening injuries.

Check cables and components regularly.

Avoid moisture on the cabinet interior.

L

CAUTION

Leaking battery fluid!

Leaking battery fluid can cause skin lesions and poisoning.

Avoid contact with leaking battery fluid.

Do not inhale battery fluid vapors.

Replace faulty batteries immediately.

NOTICE

Unsuitable cable types!

High temperatures can put a strain on cables.

Use cables that suit the temperature range. The cables must be suitable for temperatures of

5 °C (9 °F) above the ambient temperature.

NOTICE

Electrical overloading, incorrect supply voltage and incorrect wiring!

Possible malfunction or destruction of the system.

Before commissioning the device, check that the supply voltage matches the information

on the nameplate.

Install an overload protection element for the power cable. Observe the nominal current in

accordance with the wiring diagram.

Establish the connection as per the wiring diagram.

Содержание SOP300

































Отзывы: