Endress+Hauser SOP300, Краткое руководство по эксплуатации

Страница: 13 / 32

Overfill Prevention System SOP300 Incoming acceptance and product identification
Hauser 13
12 Fuse terminals
13 Remote I/Os
14 Power supply circuit-breakers
The arrangement varies depending on the configuration.
4 Incoming acceptance and product identification
4.1 Incoming acceptance
• Check the packaging for visible damage arising from transportation.
• To avoid damage, remove the packaging with care.
• Retain all the accompanying documents.
The system may not be put into operation if the contents are found to be damaged
beforehand. Contact your Hauser Sales Center if this happens. Return the device to
Hauser in the original packaging where possible.
4.2 Product identification
The system can be identified by the nameplate, which is fitted on every cabinet.
4.2.1 Hauser products
You can identify the components in the following ways:
• Enter the serial number indicated on the nameplate in W@M Device Viewer
(www.endress.com → About us → W@M Life Cycle Management → Operations → The right
device information always at hand (find spare part) → Access device-specific information →
Enter serial number): all the information relating to the system/device is then displayed.
• Enter the serial number indicated on the nameplate into the
Hauser Operations App, or scan the 2-D matrix code (QR code) on the nameplate
using the Hauser Operations App: all the information relating to the measuring
device is then displayed.