Smartec S CLD134
Commissioning
Hauser
7
4
Commissioning
4.1
Function check
#
Warning!
• Check all connections for correctness.
• Make sure that the supply voltage is identical to the voltage indicated on the nameplate!
4.2
Key assignment
Key
Assignment
CAL
Use the CAL key to acknowledge calibration data and to continue through the calibration process.
E
The ENTER key has several functions:
• It calls up the setup menus from the measuring mode.
• It is used to store (acknowledge) data entered in setup mode.
• It is used to move on within function groups.
+
and
-
In setup mode, the PLUS and MINUS keys have the following functions:
• Selection of function groups.
• Setting of parameters and numeric values.
In measuring mode,
repeatedly pressing the PLUS key
displays the following settings in
sequence:
1.
Temperature display in °F.
2.
Hide temperature display.
3.
Display of uncompensated conductivity value.
4.
Back to basic setting.
In measuring mode,
repeatedly pressing the MINUS key
displays the following settings in
sequence:
1.
Display of current measuring range.
2.
Display of current errors in sequence (max. 10).
3.
After all errors are displayed, the standard display is shown again.
Press the PLUS and the MINUS key simultaneously to perform the escape function.
