Endress+Hauser Proline Prosonic Flow 92F, Инструкции по безопасности

Страница: 8 / 16

2
Proline Prosonic Flow 92F
8 Hauser
Connecting the supply
voltage or signal cable The terminal assignment and the connection data for the supply voltage are identical for all devices, regardless
of the device version (type code).
!
Note!
A graphic illustration of the electrical connections is provided on Page 7.
Terminal assignment /connection data
Service connector The service connector (for connection, see Fig. 3 to Fig. 7, e) is only used to connect service interfaces
approved by Hauser.
#
Warning!
The service connector may not be connected in a potentially explosive atmosphere.
Technical data Dimensions
The dimensions of the Ex transmitter housing and the sensor correspond to the standard versions.
Please refer to the Technical Information for these dimensions.
!
Note!
Associated "Technical Information":
Proline Prosonic Flow 92F

TI073D/06/…
Control drawings Hauser Reinach hereby declares that the product is in conformitywith the requirements of the
FACTORY MUTUAL standards.
!
Note!
The "Documentation/Important Information" folder provided with the measuring device contains a CD-ROM
with all the Control Drawings.
Terminals 1 (+) 2 (–) 3 (+) 4 (–)
Prosonic 92F**-***********A
Prosonic 92F**-***********W
Terminal
designation
Transmitter power supply /
4 to 20 mA HART
Optional
pulse/status output
Safety-related
values

35 V (U
max
= 250 V)

35 V (U
max
= 250 V)
Terminals 1 (+) 2 (–)
Prosonic 92F**-***********H
Terminal
designation
PROFIBUS PA
Safety-related
values
U = 35 V
(U
max
= 250 V)
Terminals 1 (+) 2 (–)
Prosonic 92F**-***********K
Terminal
designation
FOUNDATION Fieldbus
Safety-related
values
U = 35 V
(U
max
= 250 V)