Endress+Hauser Proline Promass 84F, Техническая информация

Страница: 33 / 72

Proline Promass 84F, 84M
Hauser 33
Flange according to EN 1092-1 (DIN 2501) / PN 40 (with DN 25-Flanges): 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 μ m
DN G L N S LK U di
8 115 440 4 × Ø 14 18 85 28.5 5.35
15 115 440 4 × Ø 14 18 85 28.5 8.30
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N) extension - reduction / PN 40: 1.4404/316L
Only for nominal diameter DN 250 (on request)
Surface roughness (flange): Ra 0.8 to 3.2 μ m
DN G L N S LK U di
150 300 1980 8 × Ø 26 28 250 159.3 102.26
200 375 1940 12 × Ø 30 34 320 206.5 102.26
300 515 1940 16 × Ø 33 42 450 307.9 102.26
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 63: 1.4404/316L, Alloy C-22
Surface roughness (flange): EN 1092-1 Form B2 (DIN 2526 Form E), Ra 0.8 to 3.2 μ m
DN G L N S LK U di
50 180 724 4 × Ø 22 26 135 54.5 26.00
80 215 875 8 × Ø 22 28 170 81.7 40.50
100 250 1128 8 × Ø 26 30 200 106.3 51.20
150 345 1410 8 × Ø 33 36 280 157.1 68.90
250
2)
470 1890 12 × Ø 36 46 400 255.4 102.26
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
1)
flange with groove according to EN 1092-1 Form D (DIN 2512N) available
2)
not available in Alloy
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 100: 1.4404/316L, Alloy C-22
Surface roughness (flange): EN 1092-1 Form B2 (DIN 2526 Form E), Ra 0.8 to 3.2 μ m
DN G L N S LK U di
8
2)
105 400 4 × Ø 14 20 75 17.3 5.35
15 105 420 4 × Ø 14 20 75 17.3 8.30
25 140 470 4 × Ø 18 24 100 28.5 12.00
40 170 590 4 × Ø 22 26 125 42.5 17.60
50 195 740 4 × Ø 26 28 145 53.9 26.00
80 230 885 8 × Ø 26 32 180 80.9 40.50
100 265 1128 8 × Ø 30 36 210 104.3 51.20
150 355 1450 12 × Ø 33 44 290 154.0 68.90
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
1)
flange with groove according to EN 1092-1 Form D (DIN 2512N) available
2)
with DN 15 flanges