Endress+Hauser Proline Promass 84F, Техническая информация

Страница: 43 / 72

Proline Promass 84F, 84M
Hauser 43
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 40: 1.4404/316L, Titan
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 μ m
DN G L N S LK U di
8
2)
95 370 4 × Ø 14 16 65 17.3 5.53
15 95 404 4 × Ø 14 16 65 17.3 8.55
25 115 440 4 × Ø 14 18 85 28.5 11.38
40 150 550 4 × Ø 18 18 110 43.1 17.07
50 165 715 4 × Ø 18 20 125 54.5 25.60
80 200 840 8 × Ø 18 24 160 82.5 38.46
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
1)
flange with groove according to EN 1092-1 Form D (DIN 2512N) available
2)
with DN 15 flanges
Flange according to EN 1092-1 (DIN 2501) / PN 40 (mit DN 25-Flanges): 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 0.8 to 12.5 μ m
DN G L N S LK U di
8 115 440 4 × Ø 14 18 85 28.5 5.53
15 115 440 4 × Ø 14 18 85 28.5 8.55
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 63: 1.4404/316L, Titan
Surface roughness (flange): EN 1092-1 Form B2 (DIN 2526 Form E), Ra 0.8 to 3.2 μ m
DN G L N S LK U di
50 180 724 4 × Ø 22 26 135 54.5 25.60
80 215 875 8 × Ø 22 28 170 81.7 38.46
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
1)
flange with groove according to EN 1092-1 Form D (DIN 2512N) available
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 100: 1.4404/316L, Titan
Surface roughness (flange): EN 1092-1 Form B2 (DIN 2526 Form E), Ra 0.8 to 3.2 μ m
DN G L N S LK U di
8
2)
95 400 4 × Ø 14 20 65 17.3 5.53
15 95 420 4 × Ø 14 20 65 17.3 8.55
25 115 470 4 × Ø 14 24 85 28.5 11.38
40 150 590 4 × Ø 18 26 110 43.1 17.07
50 165 740 4 × Ø 18 28 125 54.5 25.60
80 230 885 8 × Ø 26 32 180 80.9 38.46
All dimensions in [mm]; Further dimensions
→
Page 28 ff.
1)
flange with groove according to EN 1092-1 Form D (DIN 2512N) available
2)
with DN 15 flanges