Endress+Hauser Proline Promass 80E, Техническая информация

Страница: 47 / 50

Proline Promass 80E, 83E
Hauser 47
Communication-specific
accessories
Service-specific accessories
Mounting set for
transmitter Mounting set for wall-mount housing (remote version). Suitable for:
– Wall mounting
– Pipe mounting
– Installation in control panel
Mounting set for aluminum field housing:
Suitable for pipe mounting (3/4" to 3")
Accessories Description
Accessories Description
HART Communicator
Field Xpert handheld
terminal Handheld terminal for remote parameterization and for obtaining measured values
via the current output HART (4 to 20 mA).
Contact your EHauser representative for more information.
Commubox FXA195
HART The Commubox FXA195 connects intrinsically safe smart transmitters with the
HART protocol with the USB port of a personal computer. This enables remote
operation of the transmitter with operating software (e.g. FieldCare). Power is
supplied to the Commubox via the USB port.
Accessories Description
Applicator Software for selecting and sizing Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum flowmeter: e.g.
nominal diameter, pressure loss, accuracy or process connections
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and
parameters over the entire life cycle of a project.
Applicator is available:
• Via the Internet: https://wapps.endress.com/applicator
• On CD-ROM for local PC installation
W@M Life cycle management for your plant.
W@M supports you with a wide range of software applications over the entire
process: from planning and procurement, to the installation, commissioning and
operation of the measuring devices. All the relevant device information, such as the
device status, spare parts and device-specific documentation, is available for every
device over the entire life cycle. The application already contains the data of your
Hauser device. Hauser also takes care of maintaining and
updating the data records.
W@M is available:
• Via the Internet: www.endress.com/lifecyclemanagement
• On CD-ROM for local PC installation
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the "FieldCare" software package, test results can be
imported into a database, printed and used for official certification. Contact your
Hauser representative for more information.
FieldCare
FieldCare is Hauser’s FDT-based plant asset management tool and allows the
configuration and diagnosis of intelligent field devices. By using status information, you
also have a simple but effective tool for monitoring devices. The Proline flowmeters are
accessed via a service interface or via the service interface FXA193.
FXA193
Service interface from the measuring device to the PC for operation via FieldCare.