Endress+Hauser Proline Promass 80E, Техническая информация

Страница: 10 / 50

Proline Promass 80E, 83E
10 Hauser
Supply voltage 85 to 260 V AC, 45 to 65 Hz
20 to 55 V AC, 45 to 65 Hz
16 to 62 V DC
Power consumption AC: <15 VA (including sensor)
DC: <15 W (including sensor)
Switch-on current
• Max. 13.5 A (<50 ms) at 24 V DC
• Max. 3 A (<5 ms) at 260 V AC
Power supply failure Promass 80
Lasting min. 1 power cycle:
• EEPROM saves measuring system data if the power supply fails
• HistoROM/S-DAT: exchangeable data storage chip with sensor specific data (nominal diameter,
serial number, calibration factor, zero point, etc.)
Promass 83
Lasting min. 1 power cycle:
• EEPROM and T-DAT save the measuring system data if the power supply fails.
• HistoROM/S-DAT: exchangeable data storage chip with sensor specific data (nominal diameter,
serial number, calibration factor, zero point, etc.)
E Status input Relay output Current output 2
Current output 1,
HART
L Status input Relay output 2 Relay output 1
Current output,
HART
M Status input Freq.output 2 Frequency output 1
Current output,
HART
N Current output Frequency output Status input Modbus RS485
P Current output Frequency output Status input PROFIBUS DP
V Relay output 2 Relay output 1 Status input PROFIBUS DP
W Relay output Current output 3 Current output 2
Current output 1,
HART
0 Status input Current output 3 Current output 2
Current output 1,
HART
2 Relay output Current output 2 Frequency output
Current output 1,
HART
3 Current input Relay output Current output 2 Current output 1,
HART
4 Current input Relay output Frequency output Current output,
HART
5 Status input Current input Frequency output Current output,
HART
6 Status input Current input Current output 2 Current output 1,
HART
7 Relay output 2 Relay output 1 Status input Modbus RS485
Order characteristic
for "inputs/outputs"
Terminal No. (inputs/outputs)
20 (+) / 21 (–) 22 (+) / 23 (–) 24 (+) / 25 (–) 26 (+) / 27 (–)