Endress+Hauser Proline Promag H 200, Краткое руководство по эксплуатации

Страница: 23 / 48

Proline Promag H 200 Installation
Hauser 23
max. 350°
8 mm 8 mm
A0013713
6.2.5 Turning the display module
+
E
–
1
3 mm
A0013905
6.3 Post-installation check
Is the device undamaged (visual inspection)?
q
Does the measuring device conform to the measuring point specifications?
For example:
• Process temperature
• Process pressure (refer to the section on "Pressure-temperature ratings" in the "Technical Information"
document on the CD-ROM provided)
• Ambient temperature range
• Measuring range
q
Has the correct orientation for the sensor been selected ( ®
ä
15)?
• According to sensor type
• According to medium temperature
• According to medium properties (outgassing, with entrained solids)
q
Does the arrow on the sensor nameplate match the direction of flow of the fluid through the piping
(
®
ä
15)?
q
Are the measuring point identification and labeling correct (visual inspection)?
q
Is the device adequately protected from precipitation and direct sunlight?
q