PROline Promag 10 P
Hauser
17
Material load diagram
Flange material: carbon steel A 105
to ANSI B 16.5
Measuring, reference and Empty Pipe Detection electrodes:
• 316L SS, standard
• Alloy C-22
Flange connections, ANSI (DIN and JIS flanges also available)
Electrode portion in contact with medium:
• 316L or Allow C-22:
≤
16
µ
inch, 240 grit (
≤
0.4
µ
m)
Fitted electrodes
Process connection
Surface roughness
Human interface
• Liquid crystal display, unilluminated, two-line, 16 characters per line
• Display (operating mode) preconfigured: volume flow and totalizer status
• 1 totalizer (7-digit plus 7-digit overflow with sign and units)
Local operation with three push buttons (-, +, E)
Remote control via HART
®
and FieldTool™
Certificates and approvals
By attaching the CE mark, Hauser confirms that the instrument fulfills all
the requirements of the relevant EC directives.
EN 60529:
Degrees of protection by housing (IP code)
EN 61010:
Protection Measures for Electrical Equipment for Measurement, Control, Regulation
and Laboratory Procedures.
EN 61326 (IEC 1326):
“Emmision to class A requirements” Electromagnetic compatibility (EMC require-
ments).
ANSI / ISA-S82.01:
Safety Standards for Electrical and Electronic Test, Measuring, Controlling and
related Equipment
- General Requirements. Pollution degree 2, Installation Category II.
CAN / CSA-C22.2 No. 1010. 1-92:
Safety requirements for Electrical Equipment for Measurement and Control and
Laboratory Use. Pollution degree 2, Installation Category II.
Devices with a nominal diameter smaller than or equal to 1” (DN 25) correspond to
Article 3 (3) of the EC directive 97/23/EC (Pressure Equipment Directive). For larger
nominal diameters, certified flowmeters to Category III are available as an option if
necessary (depends on fluid and operating pressure). All devices are applicable for
all fluids and instable gases on principle and have been designed and manufactured
in accordance to sound engineering practice.
Display elements
Operating elements
Remote operation
CE mark
Other standards and guidelines
Pressure measuring device
approval
0
10
20
30
40
50
Class 150
60
[bar]
0
145
290
435
580
725
870
[psi]
-76
-60
-40
-40
-4
-20
32
0
68
20
104
40
140
60
176
80
212
100
248
120
284
140
320
160 [°C]
[°F]
