PROline Promag 10 P
Hauser
19
Ordering information
Promag 10 P -
1
Nominal diameter / maximum full scale
25
1” / 80 gpm
40
1-1/2” / 200 gpm
50
2” / 290 gpm
80
3” / 790 gpm
1H
4” / 1240 gpm
1F
6” / 2640 gpm
2H
8” / 5280 gpm
2F
10” / 7930
3H
12” / 10,600 gpm
2
Liner
E
PTFE
3
Process connection
L
Class 150 ANSI B16.5 A105 flange
4
Electrodes / material
0
Measuring, reference and EPD electrodes / 316L SS
1
Measuring, reference and EPD electrodes / Alloy C-22
G
Measuring, reference and EPD electrodes, bullet nose / 316L SS
H
Measuring, reference and EPD electrodes, bullet nose / Alloy C-22
5
Calibration
A
0.5% calibration
6
Certificates
1
Standard, without certificate
p
Approval according to PED Cat. II;III (nor for 1”, only for ANSI/DIN flanges,
only for approval A)
7
Approvals
A
For use in nonhazardous area
R
FM approved non-incendive Class I, Division 2 / CSA Class I, Division 2
8
Protection type
A
NEMA 4X (IP 67), compact, aluminum field housing
G
NEMA 4X (IP 67), remote, aluminum field housing
N
NEMA 6P (IP 68), remote, aluminum field housing
9
Cable for remote version
0
Without cable
2
30 ft (10 m) coil and signal cable
4
Specify length in meters, coil and signal cable (priced per meter)
5
Specify length in feet, coil and signal cable (priced per foot)
10
Cable entries
B
1/2” NPT threaded
11
Display / power supply / operation
0
Without display / 85 to 250 VAC
1
Without display / 20 to 28 VAC, 11 to 40 VDC
4
With display / 85 to 250 VAC / push-button operation
5
With display / 20 to 28 VAC, 11 to 40 VDC / push-button operation
X
Sensor only, without transmitter (only up to 8” size)
12
Software
A
Standard software
X
Sensor only
13
Outputs
A
Current HART (active), pulse (passive)
X
Sensor only
1 2 3 4 5 6 7 8 9 10 11 12 13
