Endress+Hauser Micropilot FMR50, Руководство по эксплуатации

Страница: 123 / 184

Micropilot FMR51, FMR52 HART Operating menu
Hauser 123
Additional information The value specified in this parameter is added to the measured level (before linearization).
Tank/silo height 
Navigation  Setup → Advanced setup → Level → Tank/silo height
Description Specify total height of the tank or silo as measured from the process connection.
User entry –999.9999 to 999.9999 m
Factory setting Empty calibration (→  109)
Additional information If the parametrized measuring range ( Empty calibration (→  109) ) differs significantly
from the tank or silo height, it is recommended to enter the tank or silo height. Example:
Continuous level monitoring in the upper third of a tank or silo.
0%
E
1
A0019867
 31 '"Tank/silo height" parameter (→  123)' for measurements in liquids
E Empty calibration (→  109)
1 Tank/silo height (→  123)
For tanks with conical outlet, Tank/silo height should not be changed as in this type
of applications Empty calibration (→  109) is usually not << the tank or silo
height.