Endress+Hauser Memosens CFS51, Руководство по эксплуатации

Страница: 16 / 44

Mounting Memosens CFS51
16 Hauser
1
2
3
4
5
6
7
A0046861
 13 Flow assembly
1 Hose bracket (anti-bend protection)
2 Spacer
3 Ring clip
4 Hose connection, outlet
5 Flow assembly
6 Hose connection, inlet
7 Connection for cleaning (optional)
If possible, the measuring system setup should be free of air bubbles →  13. The
assembly offers an integrated bubble trap for assistance. This works best at flow rates of at
least 100 l/h (26.4 gal/h).
5.2.2 Mounting the assembly on the panel
1
2
1
A0047708
 14 Rear view of assembly
1 Boreholes for M5 screws (not included in the scope of delivery)
2 Securing plate
1. Hold the securing plate of the assembly up at the point where the assembly is to be
fixed.
2. If necessary, release the assembly from the securing plate before mounting.
3. Mark the 4 boreholes on the panel. In doing so, pay attention to the dimensions
→  10.
4. Drill the holes.