Endress+Hauser Memosens CFS51, Руководство по эксплуатации

Страница: 12 / 44

Mounting Memosens CFS51
12 Hauser
Ø55 (2.2)
Ø
40
(1
.6
)
45 (1.8)
A0046812
 7 Dimensions of solid state reference. Engineering unit: mm (in)
5.1.2 Installation instructions
Installation in flow assembly
1 2 2
A0048127
 8 Installation markings for clamping ring
1 Vertical alignment line for solid state reference
2 Horizontal alignment lines for clamping ring
The vertical alignment line on the sensor is used to align the solid state reference. The
horizontal alignment lines on the sensor indicate the exact positions where the upper and
lower end of the clamping ring must be located.
Securing the clamping ring on the sensor
Proceed as follows if the clamping ring is not pre-installed on the sensor or if the clamping
ring needs to be reassembled after disassembly:
1. Clean the surfaces on the sensor and clamping ring and remove any grease.