Endress+Hauser Liquipoint FTW33, Руководство по эксплуатации

Страница: 37 / 48

Liquipoint FTW33 Description of Device Parameters
Hauser 37
rP1
SP1
OU1
rP2
SP2
A
OU2
%
HNO (MIN)
HNC (MAX)
t
1
0
1
0
A0034529
 8 Calibration (default)
0 0-signal, output open
1 1-signal, output closed
A Hysteresis (difference between the value of the switch point SP1/SP2 and the value of the switchback point
rP1/rP2)
% Coverage of sensor
HNO Normally open contact (MIN)
HNC Normally closed contact (MAX)
SP1 Switch point 1/SP2: Switch point 2
rP1 Switchback point 1/rP2: Switchback point 2
Note The various points for the switching delay can be adjusted to ensure that rapid switching
back and forth at the switch limits is suppressed.
Switch-on value Last value selected prior to switching off.
Options No selection. The user is free to edit the values.
Input range 15 to 100 %
Switching delay time, Output 1/2 (dS1/dS2)
Switchback delay time, Output 1/2 (dR1/dS2)
Navigation Application → Output Switch 1/2 → Switching delay time, Output 1/2 (dS1/dS2)
Application → Output Switch 1/2 → Switchback delay time, Output 1/2 (dR1/dR2)
Note The switching delay time/switchback delay time functions are implemented using the
"dS1"/"dS2" and "dR1"/dR2" parameters. Since the parameter settings depend on one
another, the parameters are described all together.
• dS1 = switching delay time, output 1
• dS2 = switching delay time, output 2
• dR1 = switchback delay time, output 1
• dR2 = switchback delay time, output 2