Endress+Hauser Liquipoint FTW33, Руководство по эксплуатации

Страница: 32 / 48

Maintenance Liquipoint FTW33
32 Hauser
13 Maintenance
No special maintenance work is required.
13.1 Cleaning
The sensor must be cleaned if necessary. Cleaning can also be done while it is installed
(e.g. CIP Cleaning in Place / SIP Sterilization in Place). Care must be taken to ensure that
no damage occurs to the sensor in the process.
14 Repairs
Repair is not envisaged for this measuring device.
14.1 Return
The requirements for safe device return can vary depending on the device type and
national legislation.
1. Refer to the website for more information:
http://www.endress.com/support/return-material
2. Return the device if repairs or a factory calibration are required, or if the wrong
device was ordered or delivered.
14.2 Disposal
When disposing, separate and recycle the device components based on the materials.