Endress+Hauser Liquiphant FTL62 Density, Руководство по эксплуатации, Страница: 15 / 36

Liquiphant FTL62 Density Mounting
Hauser 15
D r
92 mm (3.62 in) 1.0002
94 mm (3.70 in) 1.0001
96 mm (3.78 in) 1.0001
98 mm (3.86 in) 1.0001
100 mm (3.94 in) 1.0001
>100 mm (3.94 in) 1.0000
5.1.4 Avoid buildup
NOTICE
The presence of buildup or corrosion on the tuning fork affects the result of the
measurement and must be avoided!
‣
Allow for maintenance intervals if required!
5.1.5 Take clearance into consideration
Allow sufficient space outside the tank for mounting, connecting and replacing the
electronic insert.
A0048474
 8 Take clearance into consideration
5.1.6 Support the device
NOTICE
If the device is supported incorrectly, shocks and vibrations can damage the coated
surface.
‣
Only use a support in conjunction with ECTFE or PFA plastic coating.
‣
Only use suitable supports.
Support the device in the event of severe dynamic load. Maximum lateral loading capacity
of the pipe extensions and sensors: 75 Nm (55 lbf ft).