Levelflex M FMP 40 with Foundation Fieldbus
5 Operation
Hauser
51
Simulation
The SIMULATE parameter allows the transducer block output value to be simulated,
provided simulation has also been enabled at the device DIP switch. The simulation
must be enabled, a value and/or status entered and the block must be in AUTO mode.
During simulation the transducer output value is substituted by the simulated value.
A simulation is also possible by switching MODE_BLK to "MAN" and entering a value for
OUT.
Parameter
Description
SIMULATE
Enables, sets and displays a simulated value, options:
– enable/disable
– simulated value
– output value
