Endress+Hauser iTHERM TM401, Техническая информация

Страница: 11 / 40

iTHERM TM412
Hauser 11
Overvoltage protection To protect against overvoltage in the power supply and signal/communication cables for the
thermometer electronics, Hauser offers the HAW562 surge arrester for DIN rail mounting
and the HAW569 for field housing installation.
For more information see the Technical Information 'HAW562 Surge arrester' TI01012K and
'HAW569 Surge arrester' TI01013K.
Performance characteristics
Reference conditions These data are relevant for determining the accuracy of the temperature transmitters used. More
information on this can be found in the Technical Information of the iTEMP temperature
transmitters.
Maximum measured error
RTD resistance thermometer corresponding to IEC 60751
Class max. Tolerances (°C) Characteristics
RTD maximum error type TF
Cl. A ± (0.15 + 0.002 · |t|
1)
)
A
AA
-200 -100 0 100 200 300 400 500 600°C
0.5
1.0
1.5
2.0
B
2.5
3.0
- 0.5
- 1.0
- 1.5
- 2.0
- 2.5
- 3.0
B
A
AA
Max. deviation (°C)
Max. deviation (°C)
A0008588-EN
Cl. AA,
former 1/3
Cl. B ± (0.1 + 0.0017 · |t|)
1)
Cl. B ± (0.3 + 0.005 · |t|
1)
)
1) |t| = absolute value °C
For measurement errors in °F, calculate using equations in °C, then multiply the outcome by 1.8.
Temperature ranges
Sensor type Operating
temperature range Class B Class A Class AA
iTHERM
StrongSens –50 to 500 °C
(–58 to 932 °F) - –30 to 300 °C
(–22 to 572 °F) 0 to 200 °C
(32 to 392 °F)
iTHERM
QuickSens –50 to 200 °C
(–58 to 392 °F) - –30 to 200 °C
(–22 to 392 °F) 0 to 200 °C
(32 to 392 °F)