Float Tank Gauge LT11/12
Hauser
39
5
Operation
5.1
Check handle
This is used in order to check that a gauge operates normally.
Note!
• When checking the gauge performance using Check handle, please do the check after putting a liquit into
tank.
• Check handle is not a float hoisting handle. Please do not hoist the float forcefully using Check handle.
1) Check the indicator performance on a scale plate of a gauge head.
2) Push Check handle into a gauge head side and turn to right with its condition. Turn to left at the position
where indicator is in high position approx. 4 through 5 mm and then let your hand go from Check handle.
Please refer to “Operating for crank unit” about crank unit operation.
Check handle
Guage head
Push-in
1
Turn to right pushing a handle in a gauge
2
5 Operation
