Float Tank Gauge LT11/12
Hauser
13
3.4
Welding for Gauge supporter and pipe supporter
When weld Gauge supporter and pipe supporter, please refer to the below drawing.
3.5
Guide Pipe
3.5.1
Guide pipe material and installation
Pipe work would be required most of installation
except some tank top or under ground applications.
Basic pipe materials in three section (gauge head to
elbow, elbow to elbow, and elbow to tank roof) and
pipe support materials are normarlly out of
EHauser’s supply.
Caution!
• When choosing pipes, select either zinc plate or
stenless steel material.
• If you are using on extremely corrosive substance,
use either completed plating or adhesive lining.
Mounting center
of gauge head
& Guide pipe
Center of
Gauge supporter
1-1/2B (corbon steel pipes)
<±5mm
<±5mm
Bend: Max. 5mm
3 Installation
