Endress+Hauser FieldPort SWA50, Руководство по эксплуатации

Страница: 64 / 76

Configuration and online parameterization FieldPort SWA50
64 Hauser
Parameter Description
Event Status Prerequisite
Event notification: on
Description
Indicates whether and which event notifications have been sent and have not yet
been acknowledged. If the check box is ticked, event notification has been sent but
not yet acknowledged.
Possible display
• "Configuration Changed" event pending
• "Device Status" event pending
• "More Status Available" event pending
Factory setting
No check boxes ticked
First unACK Time Prerequisite
Event notification: on
Description
Indicates how long the event notification shown under the "Event Status" parameter
has been pending.
Factory setting
00:00:00
Description of parameters for "Event Notification", "Standard Event Mask" tab
Parameter Description
Device Status Selection
• Primary Variable Out of Limits
• Non-Primary Variable Out of Limits
• Loop Current Saturated
• Loop Current Fixed
• More Status Available
• Cold Start
• Configuration Changed
• Device Malfunction
Extended Device Status Selection
• Maintenance required
• One of the device variables is an Alarm or Warning State
• Critical power failure
• Failure
• Out of specification
• Function check
Loop Current Saturated Selection
• Analog Channel 1
• Analog Channel 2
• Analog Channel 3
• Analog Channel 4
Loop Current Fixed Selection
• Analog Channel 1
• Analog Channel 2
• Analog Channel 3
• Analog Channel 4
Standardized Status 0 Selection
• Device variable simulation active
• Non volatile memory defect
• Volatile memory defect
• Software malfunction: unexpected condition.
• Power supply conditions out of range
• Adapter temperature out of specified range.
• Adapter hardware is defective.
• Device configuration locked