Cubemass DCI
30
Hauser
Certificates and approvals
CE mark
The measuring system is in conformity with the statutory requirements of the EC Directives.
Hauser confirms successful testing of the device by affixing to it the CE mark.
C-Tick symbol
The measuring system meets the EMC requirements of the Australian Communications and Media Authority
(ACMA).
Ex approval
Information about currently available Ex versions (ATEX, NEC/CEC etc.) can be supplied by your
Hauser sales office on request. All information relevant to explosion protection is available in separate
Ex documents that you can order as necessary.
Pressure Equipment Directive
Measuring devices with a nominal diameter smaller than or equal to DN 25 (1") correspond to Article 3(3
) of the EC Directive 97/23/EC (Pressure Equipment Directive) and have been designed and manufactured
according to good engineering practice.
Functional safety
SIL 2: in accordance with IEC 61508/IEC 61511-1 (FDIS)
Other standards and
guidelines
• EN 60529:
Degrees of protection provided by enclosures (IP code)
• EN 61010-1:
Safety requirements for electrical equipment for measurement, control and laboratory use
• IEC/EN 61326:
Electromagnetic compatibility (EMC requirements)
• NAMUR Recommendation NE 21: Electromagnetic compatibility (EMC) of industrial process and laboratory
control equipment
• NAMUR Recommendation NE 43:
Standardization of the signal level for the breakdown information of digital transmitters with analog output
signal.
• NAMUR Recommendation NE 53:
Software of field devices and signal-processing devices with digital electronics
