5 Electrical Installation
ControlCare Panel PC SPC150
12
Hauser
5.3
Peripherals
ControlCare Panel PC SPC150 offers a number of ports to which peripherals can be connected.
• When using commercial peripherals (USB, PS/2 etc.), it should be noted that their immunity
to electromagnetic interference is normally sufficient for an office environment only.
• Commercial peripherals are suitable for use during commissioning and service. If an external
mouse and keyboard are required during operation, care should be taken that they have a EMC
approval (CE mark) for use in an industrial environment.
• An external keyboard and the touchscreen can be used in parallel.
5.3.1
Access
The ports for peripherals and the external compact flash receptacle are on the bottom of the housing,
see Fig. 5-2:
Fig. 5-2: Connections for peripheral devices
5.3.2
Keyboard
Various keyboard types can be connected to the ControlCare Panel PC SPC150:
• PS/2 keyboard
connected to the PS/2 keyboard socket.
• USB keyboard
connected to the USB port:
for first-time use it is usually necessary to install a USB keyboard driver.
5.3.3
Mouse
Various mouse types can be connected to the ControlCare Panel PC SPC150:
• Serial mouse
connected to the COM1 interface: the corresponding mouse driver must be installed and
configured.
• USB mouse
connected to the USB port:
for first-time use it is usually necessary to install a USB mouse driver.
External Compact Flash
Power supply
Ethernet
VGA monitor port
PS/2 keyboard
USB Port 0
USB Port 1
COM1 serial interface RS-232
