Falcon SP100DV2
100W Folding Solar Panel
Quick Start Guide
Setting up the panel:
1. Remove the solar panel kit from the carry case.
2. Unclip the two latches on the side of the unit and fold the two panels outward. Extend the legs to
support the panels.
3. Locate in a clear sunlit area free from over hanging branches or obstructions.
4. Place the solar panel facing the sun. For maximum output we suggest moving the panels
throughout the day to track the suns position.
5. Fully extend the battery lead and connect the battery clips to the battery, red to the battery
positive terminal and black to the battery negative terminal. Ensure that the connections are secure
and do not let the positive and negative connections touch each other.
6. After connecting the battery to the solar panel the controller will turn on automatically. You will
see a welcome/initialization screen for a few seconds followed by the Default Screen showing the
status icons:
The icons will show the following states:
Daytime, the panel is receiving sufficient sun and the battery is charging.
Night time, there is insufficient sun and the battery is not charging.
Battery voltage is low
Battery is charging
Battery is full
