7 Maintenance
ControlCare Panel PC SPC150
18
Hauser
7.2.2
Opening the housing
"
Caution
Before opening the housing:
• Shut down the Panel PC.
• Switch off the Panel PC.
• Disconnect it from the power supply.
• Remove all connection cables..
Fig. 7-2: Opening the housing
After the hood has been removed, the basic board with its various (covered) elements are visible.
Loosen the two screws on the back wall of the hood. Phillips screws M3x6
Slide the hood to the left (as seen from above) in its guide slots...
until the fixing lugs are free.
Pull off the hood.