ControlCare Panel PC SPC150
5 Electrical Installation
Hauser
11
5.2
Power supply
Before connecting up:
• Check that the power supply has the correct voltage.
• Protective earth: Connect the grounding point on the housing to the cabinet earth.
A M4x10 grounding point is to be found on the bottom of the housing, see Fig. 5-1.
View from housing side:
Fig. 5-1: Connection the power supply
5.2.1
24 VDC power supply
ControlCare Panel PC SPC150 requires a 24 VDC (18–36 VDC) power supply. The power supply
must fulfil the requirements of a safely extra low voltage (SELV) circuit to EN 60950.
5.2.2
Plug connector
The 24 VDC socket for the plug connector is to be found on the righthand side of the housing.
Tab. 5-1: Plug connector for 24 VDC
To prepare the Panel PC for operation:
• Connect a 2-core cable to the plug supplied and insert it into socket in the Panel PC housing.
Note the polarity.
• Connect the other end of the cable to a 24 VDC power supply that fulfils the requirements of
a safely extra low voltage (SELV) circuit to EN 60950.
5.2.3
Option: ventilator kit
If a ventilator is used, a separate 24 VDC power supply is required.
Socket
PC 4/2-G-7,62
2-pole, pitch: 7.62 mm
Phoenix Contact
Plug
PC 4/2-ST-7,62
2-pole, pitch: 7.62 mm
Phoenix Contact
Grounding point
Power supply
M4x10
24 VDC:
PC 4/2-G-7,62
Caution:
Pin assignment
Warnung
+ –
