Endress+Hauser Cerabar S PMC 731, Руководство по эксплуатации

Страница: 61 / 68

10.4 Matrix Commuwin II INTENSOR (Software version 5.0)
H0 H1 H2 H3 H4 H5 H6 H7 H8 H9
V0
Basic
calibration
Measured
value Set 4 mA
value Set 20 mA
value Confirm
4 mA value
autom. Confirm
20 mA
autom. Set bias
pressure Confirm
bias
pressure
autom. Set output
damping Set output
safety
min.
max.
continue
Select
pressure
unit
V1
V2
Transmitter
information
Diagnostic
code Last
diagnostic Software
No. Minimum
pressure Maximum
pressure Internal
counter
high Sensor
temperature Min.
temperature Max.
temperature Default
values
V3
Lineari-
sation
Operation
mode
– pressure
– square root
– level
– cyl.
horizont.
Display on
4 mA after
linearisation
1)
Display on
20 mA
after
linearisation
1)
Unit after
lineari-
sation
1)
Density
factor
2)
Creep
flow
suppr.
3)
Clear
manual
level
- activate
- manual
- semi-autom.
- clear
Line No. Input level Set volume
V4… V6
V7
Additional
functions
Current Simulation Simulation
output
current Min.
current
4 mA Low sensor
calibration High sensor
calibration Low
sensor limit High
sensor limit Sensor
pressure Temperature
unit
V8
V9
Service
Unbiased
pressure Biased
pressure Security
locking
4)
VA
User
information
Set tag
number Set user
text
(VU 260 Z) Serial
number Serial
number
sensor Process
connection
P+ Process
connection
P– Gasket Process
diaphragm Fill liquid
Display field
1) Not in "Pressure" mode.
2) Only in the "Level linear", "Level cyc. linear" and "Level manual" operating modes.
3) Only in the "Square root" mode (flow). This parameter is only relevant for differential pressure transmitters.
4) Locking
≠
130, Unlocking = 130.
When the operating is interlocked using the +Z and -S keys, the matrix field indicates 9999.
Cerabar S 10 Operating Matrix
Hauser 61