Design and function
SPECORD PLUS
10
4
Design and function
4.1
Connections and display elements
The connections and display elements of the SPECORD PLUS are attached to the front
face and the right side wall of the device for easy access. The folding cover of the sample
chamber sits on the sample chamber walls and seals the sample chamber light-proof.
On the bottom side, there are two ducts sealed with plugs for the waste hose of the sip-
per system and the hoses of the temperature-controlled accessories.
Figure 1 Connections on the device front
1, 3 Ducts for the waste hose of the sipper system and the hoses of temperature-controlled
cell holders and changers
2 Sample chamber cover
4 Status lights for mains voltage, UV and VIS lamps
The status lamps (LEDs) indicating mains voltage and lamp operation are located on the
right front side of the SPECORD PLUS. The status lamps are lit when the SPECORD PLUS
is switched on or the lamps are on:
¡
Green: Mains voltage LED on
¡
Yellow: UV lamp LED on
¡
Red: VIS lamp LED on
