manualshive.com logo in svg

Endress+Hauser analytikjena qTOWER, Руководство по эксплуатации, Страница: 38 / 39

Поделиться
Скачать
Endress+Hauser analytikjena qTOWER Скачать руководство пользователя страница 38

Specifications

qTOWER³ / qTOWER³ G

38

11.2 Ambient conditions

Operation

Transport, storage

Temperature range

+15 °C to +35 °C

+5 °C to +55 °C

Max. humidity

70 %

10 % to 30 %

Use desiccant!

Max. permissible height

2000 m

Air pressure

0.7 to 1.06 bar

Work environment

Only suitable for operation in rooms

11.3 Standards and directives

Protection class and protection
type

The device is protection class I. The housing is protection type IP 20.

Device safety

The device complies with the following safety standards

¡

EN 61010-1

¡

UL 61010-1

¡

CAN/CSA-C22.2 61010-1-12

EMC

The device has been tested for radio interference suppression and immunity and fulfills
the requirements stipulated by

¡

EN 61326-1, interference immunity

¡

EN 61326-1, interference emission (class A)

US regulations

The device meets the requirements of Part 15 of the FCC regulations (Federal Communi-
cations Commission Advisory). The following two requirements pertain to operation: (1)
The device does not cause interference, and (2) the device is resistant to interference,
including such interference as is liable to cause malfunctions. The device meets the re-
quirements of Part 18 of the FCC regulations.

Canada regulations

The device meets the requirements of Canadian industry standard ICES-001 (Interfer-
ence-Causing Equipment Standard).

Guidelines for China

The device contains substances subject to regulation (according to the directive GB/T
26572-2011). Analytik Jena guarantees that, if the device is used as intended, these
substances will not leak within the next 25 years and therefore will not pose a threat to
the environment or health within this time period.

EU directives

The device meets the requirements of the directive 2011/65/EU.

The device is designed and tested in accordance with standards meeting the require-
ments of EU directives 2014/35/EU and 2014/30/EU. The device leaves the factory in a
sound condition with regard to technical safety. To maintain this condition and to en-
sure safe operation, the user must strictly observe the safety and operating instructions
contained in this operating manual. For accessories delivered with the device and sys-
tem components from other manufacturers, the information provided in their respective
operating manuals has priority.

Содержание analytikjena qTOWER








































Отзывы:

Нет отзывов