qTOWER³ / qTOWER³ G
Transport and storage
33
9.1.2
Return
WARNING
Risk of damage to health due to improper decontamination!
Perform a professional and documented decontamination of the device before returning
it to Analytik Jena. The decontamination report is available from the customer service
department when registering the return. Analytik Jena must refuse acceptance of con-
taminated devices. The sender may be liable for any damage caused by inadequate de-
contamination of the device.
}
Clean all device components of biologically hazardous, chemical and radioactive con-
tamination.
}
The decontamination report is available from the customer service department when
registering the return. Complete the form and attach the signed decontamination
declaration to the outside of the return shipment.
}
Only use the original packaging for the shipment and insert the transport lock. If the
original packaging is no longer available, please contact Analytik Jena or your local
distributor.
}
Apply the following warning sign to the packaging:
"CAUTION! SENSITIVE ELECTRONIC DEVICE!
".
}
Include a sheet with the following information:
– Name and address of the sender
– Name and telephone number of a contact for inquiries
– A detailed description of the fault, the precise conditions and situations under
which the fault occurs
9.1.3
Moving the device in the laboratory
CAUTION
Risk of injury during transport
Dropping the device poses a risk of injury and damage to the device.
¡
Proceed carefully when moving and transporting the device. Two persons are re-
quired to lift and carry the device.
¡
Grip the device firmly at the bottom with both hands and lift it simultaneously.
Observe the following when moving the device within the laboratory: 2 persons are re-
quired to lift and carry the device. They should position themselves on both sides of the
equipment.
Since the device does not have handles, grip the device firmly with both hands at the
lower end, lifting it simultaneously.
}
Disconnect the power and the PC from the device.
}
Position one person each at the two opposing device sides. Grip the device firmly at
the bottom with both hands and lift it simultaneously.
}
Observe the information for setting up the device at a new location.