Safety instructions
Biometra TRIO
12
Version 03_19
The following has to be observed:
The operator must only operate the device in a sound and operationally safe condi-
tion. The technical condition must always comply with the legal requirements and
regulations.
Prior to every use the device must be checked for damage and sound condition.
Any changes in the device affecting its safety must be reported by the operating
personnel to the operator without delay.
2.4
Requirements for the operating personnel
The Biometra TRIO must only be operated by qualified specialist personnel instructed
in the use of the device. The instructions also include imparting the contents of this
manual.
In addition to the safety at work instructions in this operating manual the generally
applicable safety and accident prevention regulations of the respective country of op-
eration must be observed and adhered to. The operator must ascertain the latest ver-
sion of these regulations.
The operating manual must be accessible to the operating and service personnel at all
times.
2.5
Safety instructions: transport and installation
The following has to be observed:
Drain the sample block before transporting the Biometra TRIO. Make sure there are
no sample tubes in the block.
Only ship the Biometra TRIO in its original packaging.
Please verify that the delivery is complete on receipt of the Biometra TRIO and
check for possible transport damage. In case of claims please contact Biometra
GmbH.
2.6
Safety instructions
–
operation
2.6.1
General
The operator of the Biometra TRIO must make sure before each commissioning that
the condition of the device including the safety equipment is sound.
The following has to be observed:
Free access to the power switch on the back of the enclosure has to be ensured
during operation.
The ventilation fittings at the rear of the device must be unobstructed and opera-
tional. Covered ventilation grilles or slits etc. may cause the device to break down or
may cause damage to it.