Magical balancer
6
Periodic Inspections and Maintenance
34
6.
Periodic Inspections and Maintenance
Daily and periodic inspections are required for the product to be used safely and properly.
If any failure is found in the inspections, the relevant parts must be replaced. Please contact us in
such cases.
DANGER
Periodically inspect the Magical Balancer, and replace worn or damaged parts.
If any abnormal part is found during the periodic inspection, do not use the
product as is, but repair it immediately.
WARNING
Never perform any modification of the product or its accessories.
Never use parts other than our genuine parts.
If any abnormal part is found during the maintenance and inspection, do not use
the product as is, but repair it immediately.
Before performing the inspection, pull out the wire rope completely, evacuate the
air inside the cylinder, and then shut off the air supply.
However, inspections that are performed while operating the Magical Balancer are
excluded, such as inspection of the operation of the grip controller, balance, and
anti-jump device.
Before performing maintenance and inspection or repair, shut off the air supply.
The maintenance and inspection or repair must be performed by a person with
expertise designated by the business operator.
Always perform the maintenance and inspection or repair with an empty load
(without a load).
Be sure to lift down the Magical Balancer to the ground before disassembling it.
When performing the maintenance and inspection or repair, be sure to post a sign
indicating that the work is in progress (such as “Inspection in progress” and “Do
not operate”).
If there is anything unclear regarding the Magical Balancer, stop using it and
contact us or the agent from which you purchased the product.
CAUTION
Follow the instructions to perform lubrication.
When performing a test run after the maintenance and inspection or repair, be
sure to perform it with the Magical Balancer suspended.
Note: Do not operate the Magical Balancer with slack in its wire rope.
Содержание EDB-130
Страница 45: ...44 8 Dimensional Drawing EDB 50...
Страница 46: ...45 EDB 85...
Страница 47: ...46 EDB 130...