Endo EDB-130, Руководство пользователя

Страница: 29 / 48

Magical Balancer 5 Usage of Magical Balancer
28
5-2 Starting up the Magical Balancer
1
Ensure that no load is hung on the bottom hook of the Magical Balancer.
2
When the power switch of the Magical Balancer is turned ON, the grip controller automatically
stands up and the initialization setting process is started. Until the initialization setting process is
completed, do not touch the grip.
Note: In rare instances, the standing-up of the grip controller may stop in the middle.
In such cases, slide the grip upward until the grip controller is lifted away from the ground.
3
After the initialization setting is completed, the weight display screen is automatically displayed.
4
If the initialization is completed normally, a beep sounds and the Work lamp (blue) turns ON,
completing the startup.
Initializing Initialized
5-3
Controlling the Magical Balancer
5-3-1 Control mode
The Magical Balancer can be controlled by switching the following two control modes.
With the factory default system settings, the control modes are switched automatically.
Grip mode: This is an operation mode in which the balancer raises or lowers a load
by sliding a grip controller.
In addition to lifting and lowering the load, this operation can also be used
to load and unload the load.
The Grip lamp (green) lights up during grip mode.
Balancing mode: The suspended load is raised or lowered by directly touching it.
The load stays at the required position.
The Work lamp (blue) lights up during the balancing mode.
(light off) (Blue lightning) (light off)
(Green flashing) (Blue flashing) (Red flashing)
Grip mode Balancing mode